High Pressure Forming Machine|Medium Pressure Forming Machine--High Speed Punching Machine

 I. Features:
1. Display and set temperature in touch screen (voltage control temperature).
2. Display and set the hydraulic pressure, mould opening speed, mould closing speed, mid-stop position and baking time in the touch screen, with pressure holding function.
3. Position signal using rack and pinion encoder, repeatability ± 0.02mm.

High Pressure Forming Machine

4. Reserve control interface for robot, pneumatic control interface for external heating plate, and control interface for safety door.
5. Provide pneumatic safety device to prevent the upper mould from falling, equipped with safety grating.

 High Pressure Forming Machine

6. Upper and lower add vacuum pump, can choose to open the vacuum time and vacuum suction time length.
7. The upper and lower moulds are equipped with induction probes, 4 points for each of the upper and lower moulds, which are shown on the display.
8. The operating surface is installed with safety valves, cylinder driven iron net, below the soft rubber, and with proximity switches.

High Pressure Forming Machine

9. Temperature heating control is divided into two parts, each part of the four groups of temperature independent control, independent display, each group 2KW 220V AC.
10. Parameters: working table: 800 * 500, clamping force: 100T, gas pressure: 30KG/CM.
11.Advantages: composite corners do not whiten, do not leave the layer, stainless steel brushed material does not pull cracks, do not break, IML products around the perfect anti-wrap one-time moulding.