Seeking Expertise on Punch Press Clutch

   Seeking Expertise on Punch Press Clutch

leadframe high-speed punch press

    This is a punch press clutch located between a punch press transmission flywheel and a crankshaft, and its structure includes a clutch body, a clutch diagonal key, a clutch lever and a pressure cover. The shafts of the clutch tilting key and the clutch lever are mounted in the shaft holes of the clutch body and the pressure cover, respectively, and the hook-like projection of the clutch tilting key is positioned opposite to the short arm of the clutch lever. The spring hole in the wall of the bending column of the clutch body is equipped with a compression spring, and the clutch tilting key is pushed into the corresponding wedge-shaped keyway of the transmission flywheel under the action of the spring, thus realizing the transmission engagement.

leadframe high-speed punch press

     The main function of the clutch in mechanical operation is to ensure that the transmission system can be readily separated and combined, it is mainly divided into two types of tooth embedded and friction type. There are a number of clutches on the market today that use this form of construction. The one mentioned above is most likely a tooth-inlay design. The friction type, on the other hand, refers to the use of relative motion between the friction plate and the gear to transmit power or torque. The main function of this clutch in a punch press is to ensure that the press can be stopped while the power system continues to run, thus facilitating operations such as maintenance and inspection. The following is a description of the application and precautions to be taken when using a clutch in a punch press. When you use this clutch, what are some of the things you need to pay special attention to?1. The clutch must have sufficient mechanical strength and rigidity;2. It is necessary to make sure that there is a good lubrication environment and to avoid wear or corrosion of the parts due to friction;3. It is not possible to stop work immediately after the engine stops working.

leadframe high-speed punch press