Introducing some preventive measures for over-travel on high-speed presses

    Here are some preventive measures for over-traveling a high-speed punch press:

    Regular equipment inspection and maintenance
        Establish a strict equipment inspection program, including mechanical parts, electrical system and control system.
        Regularly check the wear and tear of the slider, guide rail, and screw, and timely replace parts that are badly worn.
        Ensure that the electrical wiring is firmly connected and free from aging and breakage.
    Install and debug the mold correctly
        When installing the mold, follow the operation specification strictly to ensure the installation accuracy of the mold.
        When debugging the mold, carefully adjust the stroke and closing height to avoid interference between the mold and the press.
    Strictly follow the operation specification
        Train the operators to familiarize them with the operation procedures and precautions of the punch press.
        It is strictly prohibited for the operators to change the parameters and operation modes of the equipment privately.
    Setting reasonable stroke parameters
        According to the requirements of the processed workpiece and the characteristics of the mold, set the appropriate stroke length and stroke times.

Preventive measures for over-travel of high-speed presses

Preventive measures for over-travel of high-speed presses

        Reserve a certain safety margin to avoid over-traveling due to unforeseen circumstances.
    Install reliable travel limit device
        Select reliable quality travel limit switches and check their working condition regularly.
        Ensure that the installation position of the limit switch is accurate and can detect the travel limit of the slide in time.
    Monitor the stamping process
        During the stamping process, closely observe the operating status of the equipment, such as sound and vibration.

Preventive measures for over-travel of high-speed presses