Precision high-speed punch presses need to pay attention to the problem

   Key issues to be aware of when operating a precision high-speed punch press:

    Safety operation specification:
        Prohibition of touching: It is strictly prohibited to touch the material lever and the rotating and sliding parts during the operation of the punch press slider and when adjusting the height.
        Two-handed operation: Both hands must be used to press both buttons at the same time for operation.
        Troubleshooting: If a fault occurs during the operation of the slider, it should be stopped immediately and the instruction should be followed.
        Photoelectric safety: Ensure that the photoelectric type safety device is effective and manage the key.
   Precision High Speed Punch Press

Mould and equipment check:
        Mould firmness: mounting mould screws must be firm, upper and lower moulds should be positive.
        Equipment check: Before working, check whether all parts of the punch press and guards are normal.

   Precision High Speed Punch Press

    Operating environment and personnel:
        Tidy environment: no other people and obstacles should be placed around the press.
        Personnel training: operators must be trained to master the equipment structure, performance and operating procedures.
 Following the above norms can ensure the safe and efficient operation of the precision high-speed punching machine.

   Precision High Speed Punch Press