Model：MARX-60T
Brand: OREKU elbow joint punch
Precision: JIS special grade
Speed: 750 times/min
Tonnage：60T
Stroke: 30mm
Price: Negotiable.
Punching Terminal High Speed Punching Machine Accessories
1. Universal frequency converter + speed-regulating shaft motor
2.Combined pneumatic clutch brake
3.Dynamic balancing device (weight-selective)
4.Electronic cam switch
5. Stop angle automatic correction device
6.Electronic crankshaft angle indicator gauge
7. Touch screen (Chinese: Simplified)
8.Speedometer
9.Total counter electronic 8 digits (touch screen)
10. Preset counter electronic 8-digit (touch screen)
11.Closed mold height display
12.Timer 7 digits
13.Motorized slide adjuster
14. Socket for misfeed (with switch) 1pc.
15.1 socket for stopping the tension limit
16.Micro inch movement
17.Circulating oil control unit
18.Air control unit
19.Material oil feeding device (with solenoid valve)
20.Safety door (front up/down type only)
21.Motor reversing device
22.Full stop circuit
23. Operating cabinet (with rolling wheels) body operating panel
24. Two-handed button (with 1-point CASE)
25.Oil cooling device
Optional accessories for high-speed punch press
1. Anti-vibration device
2.Precision cam clamp feeder
3. Material guide (to the working end surface) a
4. Lower dead center detector
5. Cut-off counter (electronic 6 digits) 2 sets
6. Air injector (with solenoid valve) DC
7. Material drop hopper
8.Material end stop switch (proximity type)
9.Flywheel brake
Parameters of high-speed punching machine for punching terminals
Model: MARX-60T
Pressurizing capacity: 600KN
Stroke: 20/25/32/40 mm
Stroke number: 100-750/100-750/100-650/100-550 spm
Closed mold height: 220-300 mm
Slider adjustment: 80 mm
Slider size: 1130×500 mm
Table size：1100×600 mm
Table thickness: 140 mm
Table opening size: 800 (top) × 700 (bottom) × 100 mm
Table opening size: 840×120 mm
Main motor：22×4P kw
Upper mold weight: MAX450 kg
Total weight: 14000 kg
External dimensions: 2840×3170×1540 mm
Punching terminal high-speed punching machine structure
Punch Terminal High Speed Punch Press Stamping Products
Punch terminal high-speed punch press maintenance:
1, often keep the center column, the slider guide column clean, as well as racking the mold to keep the mold base plate free of dirt, to ensure that the platform is clean to avoid scratches. 2, the new machine in the use of 1 month, the flywheel at the addition of grease (including feeder), if not refueled for a long time, will lead to internal wear and tear of the flywheel, affecting the performance of the machine tool, and each subsequent maintenance needs to be added (high temperature 150 ℃ more than the grease)
3, the replacement of machine circulating oil: new machine in 1 month to replace 1 time, and then every six months to replace 1 time, to ensure the normal operation of the machine and precision (32 # mechanical oil or Mobil 1405 #)
Punch terminal high-speed punch press use method:
1, before starting the machine, the speed potentiometer (W) set on the control panel should be adjusted to the lowest point (O point) position.
2、After the main power switch (DK) is turned on, the power indicator light is on, and the phase sequence indicator light should also be on, otherwise the phase sequence should be checked to see if it is correct.
3、Break the phase after turning on the control circuit with the key switch. Indicator lamp three should be bright at the same time, otherwise should check, troubleshooting.
4, clockwise adjustment of the “speed” potentiometer, the main motor drive flywheel start, the speed should be smooth without vibration, no impact and other phenomena exist.
5, in the process of connecting the main clutch, should be operated at the same time left and right hand. In the process of formal stamping, the external control key switch should be turned on and the key switch of the regulator should be in the state of reset before it can work formally, otherwise the feeding switch and the mold failure signal will be out of control.
6、During the formal stamping process, since the static differential rate of the main motor varies with different loads, when stamping different parts, the electromagnetic counter set on the control board can be used to calibrate the rotational speed.
High-speed press is an advanced stamping equipment with the following significant features and advantages:
High Speed
Extremely high stamping frequency, up to hundreds or even thousands of times per minute, significantly improving production efficiency.
It can meet the needs of mass production and quickly complete a large number of stamping tasks.
High Precision
Equipped with precise control system and transmission components to ensure the dimensional and shape accuracy of stamped parts.
Precision stamped products with extremely small tolerance and stable quality can be produced.
High Stability
Adopting high-quality materials and advanced manufacturing process to ensure the stability of the equipment in long-time operation.
Reduce the fault downtime and improve the utilization rate of the equipment.
