What to pay attention to when choosing a high-speed punch press

       High-speed presses usually refer to presses with more than 300 strokes per minute, while large tonnage presses (200 tons) usually have between 100 and 300 strokes per minute. High-speed presses are characterized by high speed, high efficiency, good quality and low cost, and are therefore widely used in the electronics industry, the automotive industry and the mold manufacturing industry. High-speed punching machines usually need to be equipped with continuous progressive dies and automatic feeding devices to make full use of the advantages of high-speed punching machines. Therefore, high-speed punch press requires high precision in mold manufacturing, especially the selection of mold materials and heat treatment process have strict regulations. When selecting a high-speed punch press, I think there are several key points to pay special attention to.High Speed Stamping Machine 

    1, when choosing brands and manufacturers, give priority to those manufacturers with excellent craftsmanship and rich design experience. The host factory produces superior quality products, especially in a certain type of high-speed punch products, its production time can be more than 5 years, and the quality of the customer's products are usually very stable, basically there will not be a big gap;\
   2、About the accuracy, the country has released the accuracy standard (2013 version) for open and closed type high-speed precision presses in 2013, but it also depends on whether the host manufacturer has followed this latest standard. If the precision of the high-speed press is not up to standard, then it will not be able to produce qualified products.High Speed Stamping Machine

    3. When dealing with oil leakage, high-speed punches usually use an automatic forced thin oil lubrication system, which results in the lubricant needing to be injected constantly. If the lubricant is of poor quality, improper collection may cause the oil to splash around.4. For high-speed presses, due to their high speed, the machine body must have excellent shock resistance and high rigidity. If the foundation or installed shock pads are not in place, this may result in a substandard product with excessive vibration.5. Ensure that the molds and feeds are matched so that the speed of the molds and feeds can be consistent with the number of high-speed impacts.6. In terms of price, high-speed punching presses vary significantly between different manufacturers of the same type. It is recommended to consider each of the above steps together.

High Speed Stamping Machine