High-speed punch press daily maintenance mainly to do what?

C-type high-speed punch

The daily maintenance of high-speed punching machines mainly consists of six aspects:
一. Exterior Maintenance. Ensure cleanliness both inside and out, free from rust and yellowing.
1. Clean the surface of the punching machine, and after work, apply machine oil to all processed surfaces to prevent rust.
2. Clear away the wood chips (inside, outside)
3. Check for any dents, bumps, or scratches inside and outside the punch press.
二. Main Axis Section
1. Operation Status of Hydraulic Fixtures
2. Status of the main spindle operation
三. Lubrication Section
1. The oil level of each lubricating oil tank.
2. At each manual refueling point, refuel according to regulations, and rotate the oil filter.
3. Wipe each part of the reading machine with gauze monthly, and lubricate each pivot point at least once every six months.
四、. Tail Assembly
1. Once a week, move the tailstock to clean the bottom surface and guide rails.
2. Capture the top spot with a thorough cleanup chase once a week.
五、Chapter Five: Electrical Components
1. Check the tricolor light and switch.
2. Check the positions of all parts on the control panel.
六. Other Sections
1. The hydraulic system has no oil leakage or overheating phenomenon.
2. The cutting fluid system is operating normally.
3. The workpieces are arranged neatly.
4. Clean around the punch press to ensure cleanliness.
5. Carefully complete the handover records and other documentation.

C-type high-speed punch

Good daily maintenance is the guarantee for the normal operation of the punch press. We must do it carefully. You can take a closer look, hoping it will be helpful to you! I won't say much here because everyone will encounter some problems and difficulties, so I will inform you promptly. If necessary, please consult our official website. If not, you can also contact us by phone.

C-type high-speed punch