Precision punching machine manufacturers in the operation of certain minor faults are sometimes very inevitable

       Precision punch press manufacturers in the operation of certain small faults sometimes is very inevitable, know some precision punch press fault causes and troubleshooting knowledge, especially some small faults troubleshooting methods, to be able to punch the normal operation of the production of the machine, here precision punch press manufacturers on a simple introduction to the common causes of faults and troubleshooting. Manipulator through specific action work due to the sound insulation cover is sealed, so to reserve material import and export and heat dissipation channel, in order to sound insulation to be in the channel mouth an apparatus and other sound-absorbing materials.

Precision Punching Machine Manufacturers

    First, the upper and lower clamping moulds click together after the detachment:
When the upper and lower clamping mould stops the slider, please disengage the clutch according to the following method.
1, the position of the crankshaft before or after the lower dead centre must be confirmed.
2. Set the air pressure of the clutch to 4-5.5kg/cm2.

Precision Punching Machine Manufacturers

   3、After the dead centre, the motor can rotate in accordance with the original positive rotation. If it is before the dead centre, the motor's connection must be changed to the opposite side, so that the motor can be reversed.
4, make the motor start, drive the pulley idling, and then turn back to full speed.
5, will operate the switch to switch to (inching) and then pressure to release the operation of the pressure button switch, after several times of repeated operation, so that the slider up to the beginning of the position.

Precision Punching Machine Manufacturers